Our treated timber decking balustrade is available in both traditional and contemporary styles allowing you to balustrade your deck using either turned spindles & newels or with square / stop chamfer spindles and newels.
All softwood timber decking components have been pressure treated with tanlith-e outdoor preservative which turns the timber a slight green colour, This colour may not be consistent throughout the whole product therefore if a consistent look is desired this product will need to be stained after installation. All decking products are stored outdoors and may be delivered damp.
Treated Softwood Cap Dimensions
128mm x 84mm x 84mm
Treated Softwood Post Cap Fitting
Cap comes with a 38mm diameter spigot dowel on the bottom to push into a hole drilled into the top of the post. This spigot dowel can be removed if required
Drill a 38mm diameter hole into the top of your post and push the cap into place. Use a suitable external wood adhesive for extra stability
Free Planning Service
Not sure what you need for your deck?
Send us a plan or photographs of your deck and we will be happy to work out the parts you need and supply you with a quote. Call 01691 671020 or email firstname.lastname@example.org
Treated Timber Decking Balustrade Specification
Manufactured using Scots Pine
Pressure Treated with Tanlith-E Outdoor Preservative
128mm High x 85mm Wide
There are no reviews for this product at the moment