32mm Base Rail

Summary

Pine 32mm Stair Base Rails 

Base Rails are fitted onto the top of the staircase string and directly to the landing floor by screwing through the rail. Always drill pilot holes to stop any splitting and counter sink the screw head into the timber. Spindles and fillet strip will cover any fixings to the string or landing floor. 

All Base Rails are supplied with spindle spacer/ fillet strip which is cut to size during installation and glued and pinned into the base rail using a suitable wood adhesive and panel pins. Panel Pins should be counter sunk and filled with a suitable wood filler to match the timber.

Stair Case Building Regulations 

IMPORTANT - Spindles should not be spaced more than 99mm apart to meet current building regulations. 

Current building Regulations state that a sphere of 100mm in diameter should not be allowed to pass between two spindles. 

Handrail height needs to be a minimum of 900mm. Measure from the floor to the top of the handrail on the landing area and measure from the front of a tread to the top of the handrail on the stairs.

IMPORTANT - Spindles should be spaced no greater than 99mm apart to meet current building regulations.

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here

Specification

Pine 32mm Stair Base Rail Dimensions 

Base Rails measure

• 32mm High
• 62mm Wide. 

Available in various lengths depending on the timber selected. Use the drop down boxes to select your length and timber type. 

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here