41mm Pine Octagonal Spindle

Write a review

SKU (OT9041PP)

OVERVIEW

Pine Octagonal 41mm spindles are used on the staircase and landing areas. These spindles will fit into any 41mm grooved rail. Select length and timber type. Use the spindle calculator to establish how many spindles you need  

Read More


PRICE (including VAT)

£3.85


Availability

ITEM IN-STOCK Delivery Within 5-7 Days

Shipping

£10.00 (To Ship Entire Order)


Spindle calculator


Summary

41mm Pine Octagonal Stair Spindle

USE THE SPINDLE CALCULATOR ABOVE TO ESTABLISH HOW MANY SPINDLES YOU NEED 

Pine Octagonal 41mm Spindles can be used on the stairs or landing area and fit into any 41mm grooved hand and base rail

Spindles are supplied 900mm length

900mm Spindles are used on domestic staircases and landing areas where building control require a handrail height of 900mm 

Fitting Pine Octagonal Stair Spindles

Newel Posts are fitted first followed by base rails and handrails.

When fitting spindles to your stair case you must first find the angle of the stairs, this can be achieved using a sliding bevel or angle finder.

Cut your spindles top and bottom to the right angle and length. Try each spindle between the hand and base rail sliding it from the bottom of the staircase to the top. This will ensure any rail run-out will be allowed for.

Once all of your spindles are cut you will need to cut your spindle spacers from the fillet strip provided in our rails. This is cut at the same angle as the stairs making sure that the spindles are spaced no more 99mm apart.

Start at the bottom of the staircase and insert the first spacer followed by a spindle. We suggest dry fitting all of your spindles and spacers before fixing into place then bed all spindles and spindle spacers on PVA wood adhesive. We recommend pinning the spindles in place, panel pins should be inserted below the level of the spindle spacer so the spacer will hide the head of the panel pin. 

Counter sink any panel pin heads showing on the spindle spacer into the timber and fill with a matching wood filler

Follow the same procedure for the landing spindles 

Staircase Building Regulations

Handrail heights on the staircase are measured from the front bullnose of a step to the top of the handrail.

Spindles must not allow a sphere 100mm in diameter to pass between two spindles 

If you are unsure please contact us or your building inspector for new builds 

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here

Specification

Pine Octagonal 41mm Stair Spindles 

41mm x 41mm x 900mm - Domestic Stairs 

  • Bottom Square Section Measures 195mm
  • Middle Turned Section Measures 550mm
  • Top Square Section Measures 150mm 

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here

REVIEWS

There are no reviews for this product at the moment


Please log in to leave a review

We'll beat any like-for-like quote on
all stair parts.

Our online interactive stair planner allows you to browse, select and plan
your ideal staircase in 3 simple steps. Why not try it today?