Treated Softwood Clearview Glass Decking Rail

Summary

Treated Clearview Glass Rails 

Treated Rails 85mm x 28mm x 1790mm 

Slotted for 7 x 8mm Clearview Glass Panels. 

Clearview Decking is a contemporary decking solution ideal for those who wish an unobstructed view from the deck or simply want a look different from traditional decking spindles. Clearview Decking uses toughened glass panels along with pressure treated timber handrails, capping rails and newel posts to create a unique and distinctive look for your deck.

Treated Softwood Clearview Glass Rail 

The Softwood Glass rail is used with the 8mm Toughened Glass Panels. 

The rails are fixed to the newel posts with the Black Rail Hangers, screw the hanger to the rail then the screw the hanger and rail to the newel post. Hangers do not have to be used, you can fix with mortise and tenon joints if preferred 

We suggest bedding your glass decking panels onto silicon during installation, this will stop any potential rattle.

All softwood timber decking components have been pressure treated with tanlith-e outdoor preservative which turns the timber a slight green colour, This colour may not be consistent throughout the whole product therefore if a consistent look is desired this product will need to be stained after installation. All decking products are stored outdoors and may be delivered damp.

Softwood Decking Rail Dimensions

1795mm x 28mm x 85mm

Decking Balustrade Guide 

It is important to get a good solid fix to the joists with the newel posts, so ensure you plan your joist configuration to allow for handrail lengths no longer than 1795mm. Posts should be lap jointed to the joists and secured with suitable external coach screws or bolts. 

Decking rails can fixed to the newel posts using rail hangers or traditional mortise and tenon joints, position the rails so the spindles or glass fit securely into the rail

American Spindles need to be drilled and screwed to the rail using suitable external screws. Ensure you drill pilot holes through the spindles and into the rail. Screwing straight through the spindles without a pilot hole will split the timber

Capping Rails are fixed to the rail using suitable external screws from underneath. 

As standard, timber decking materials are made from softwood Scots Pine. There is a natural tendency as the timber weathers for there to be minor surface checking and splitting, caused by the variation in moisture content and the effects of wetting and drying out. These surface defects do not harm the decking structure. As with balustrades, decking should have a proprietary clear water repellent, semi-transparent seal or decking oil applied, for the sake of protection and enhancement. Make sure that the decking is dry before you start. Test by sprinkling drops of water over the surface and if the wood does not absorb the moisture let it dry out and retest before carrying out the work. Note that newly-laid decking should not have any finish applied until it has weathered properly. Add an end-seal preservative to any surface that has been exposed by drilling or cutting

Free Planning Service

Not sure what you need for your deck?

Send us a plan or photographs of your deck and we will be happy to work out the parts you need and supply you with a quote. Call 01691 671020 or email info@blueprintjoinery.co.uk

Specification

Clearview Glass Decking Rails 

Measure 1795mm x 85mm x 28mm 

• Manufacturered Using Scots Pine
• Pressure Treated With Tanlith-E Outdoor Preservative
• Suitable For Domestic Ground Level Decks 
• Pre-Slotted for 8mm Toughened Glass Panels