Stop Chamfered Decking Balustrade Kit

Write a review

SKU (DKSC)

OVERVIEW

This kit includes everything you need to start and extend decking balustrade - select the "Starter Kit" which will give you a post to start, a post to end and a 1800mm section, this includes Rails, Spindles and Posts. Then select the "Add On Kit" which extends the starter kit by a further 1800mm

Read More


PRICE (including VAT)

£103.00 WAS £110.00 - You save £7.00


Availability

ITEM IN-STOCK Delivery Within 5-7 Days

Shipping

FREE

Summary

Stop Chamfered Treated Softwood Balustrade Kits 1800mm Rails, Spindles & Posts

This item comes with free delivery.

This kit includes everything you need to start and extend decking balustrade - select the "Starter Kit" which will give you a post to start, a post to end and a 1800mm section, this includes Rails, Spindles and Posts. Then select the "Add On Kit" which extends the starter kit by a further 1800mm.

Select the "No Post Kit" if you plan to use your own posts.

In the STARTER KIT you get the following items:

  • 2 x Treated Stop Chamfered Newel Posts 1250mm x 82mm x 82mm.
  • 3 x Universal Rails 1800mm. 1 x Base Rail, 1 x Handrail and 1 x Capping Rail
  • 13 x Treated Stop Chamfered 41mm Spindles.

In the ADD ON KIT you get the following items:

  • 1 x Treated Stop Chamfered Newel Post 1250mm x 82mm x 82mm.
  • 3 x Universal Rails 1800mm. 1 x Base Rail, 1 x Handrail and 1 x Capping Rail
  • 13 x Treated Stop Chamfered 41mm Spindles.

In the NO POST KIT you get the following items:

  • 3 x Universal Rails 1800mm. 1 x Base Rail, 1 x Handrail and 1 x Capping Rail
  • 13 x Treated Stop Chamfered 41mm Spindles.

Use the universal rail in the following way:

Base Rail - Make sure the rail is groove face down. Do not put spindles in the groove, it will collect water and rot over time. Drill pilot holes in the rail and screw up from the bottom of the rail into the end of the spindles. Spindles fit flush to the flat top side of the rail.

Handrail - Fit the groove over the top of the spindles. Drill pilot holes through the top of the rail and screw through the rail into the end of the spindles.

Capping Rail - Fit the rail over the top of the handrail to cover the screw heads. Screw up from under the handrail into the capping rail to secure.

PLEASE NOTE: All softwood timber decking components have been pressure treated with tanlith-e outdoor preservative which turns the timber a slight brown colour. This colour may not be consistent throughout the whole product. This product will need to be treated after installation to gain a consistent colour.

All decking products are stored outdoors and may be delivered wet.

Free Planning Service

Not sure what you need for your deck?

Send us a plan or photographs of yours deck and we will be happy to work out the parts you need and supply you with a quote.

Call 01691 671020 or email info@blueprintjoinery.co.uk

Specification

Stop Chamfered Treated Softwood Balustrade Kits 1800mm Rails, Spindles & Posts Specification

  • Manufacturered Using Scots Pine
  • Pressure Treated With Tanlith-E Outdoor Preservative
  • Suitable For Domestic Ground Level Decks Below 600mm High

Free Deck Planning Service

Not sure what you need for your deck?

Send us a plan or photographs of yours deck and we will be happy to work out the parts you need and supply you with a quote. Call 01691 671020 or email info@blueprintjoinery.co.uk

REVIEWS

There are no reviews for this product at the moment


Please log in to leave a review

Requesting a brochure has never been so easy!
Click below to find out more.

Our clearance section boasts high-quality products at low prices – the perfect
option for top-of-the-range flooring and staircase parts on a budget.