AXXYS Chrome Squared 12 Step and Landing Balustrade Solutions Kit
We have designed this kit to help overcome the difficult process of understanding which stair parts you require for your staircase. This balustrade kit includes all the parts you need to replace the entire balustrade up a 12 step straight flight with a landing area up to 2400mm long.
AXXYS Squared Stair Balustrade Solutions has been designed to fit simply to your existing or new Stair Newel Posts. The Chrome handrail fixing bracket screws on to the Newel Post making installation quick and easy for any competent DIY'er. The Oak Handrails and Oak Baserails are supplied pre-grooved to accept the stair or landing chrome square spindles and come complete with fillet strips for spacing the chrome spindles. This system does away with all the different types of fittings which can confuse and complicate the project and offer just two different types of Chrome Handrail Connectors.
The AXXYS Squared system is the latest in the AXXYS Stair part range, and gives a fresh contemporary look to your staircase. The Chrome Squared Spindles, Squared Profile Hand Rail and Baserail can be fitted to your existing Newel Posts saving you time and money, or take advantage of our and change the look of your staircase overnight.
AXXYS Chrome Squared Kit Contents
You get the following items with this axxys balustrade Kit
AXXYS Squared Stair Part Usage Guide
You will need to decide whether you are using existing newel posts or replacing. If you are using existing then measure the distance between posts to determine what lengths of hand and baserail you need. Secure the baserail to the staircase string by drilling the baserail from the top and secure down through the rail into the staircase string with suitable wood screws. The screw needs to be slightly counter sunk. The screw heads will be hidden by the fillet strips and spindles. To fix the AXXYS Squared Baserail to the landing simply drill the rail and secure it to the landing flooroards.
The handrail will need to be cut to size and inserted into the AXXYS Squared Handrail Connector, one connector for the top and one for the bottom newel. Offer the handrail up to the post and support by inserting an AXXYS Squared Chrome Stair Spindle into the baserail groove and handrail groove. This will give you the correct height to fix the Squared Handrail Connector to the newel post. Seperate the handrail connector into the two parts and secure the base plate to the newel post at the market height. You can then join the handrail connector end to the base plate on the newel post.
Once the handrail has been connected you can insert all the spindles up the stairs making sure there is not a gap between them more than 99mm to conform to UK Building Regulations. We recommend that you secure the spindles and fillet strips in place with a polymer adhesive or suitable silicon to stop and rattle of the spindles once fitted to the staircase
Your AXXYS Chrome Squared landing spindles should be fitted in the same way as the stairs
If you have a landing area then you can use the AXXYS Squared Chrome Horizontal Turn or mitre the hand rail and baserail at 90 degrees from the top newel post to create your return back across the landing area. The handrail can be finished against the wall by fitting the rail to either a half newel post or rosette.
AXXYS Squared Help and Advice
Need help in getting the right components for your staircase, then just give us a ring on Oswestry 01691 671020 or fax your plan to Oswestry 01691 671030 or email us and we will provide a quote
Email your plans to firstname.lastname@example.org
Delivery is set at £35 per order, however if you only need a few parts just give us a ring to discuss the cost.