220mm Reflections Glass Stair and Landing Panels

Summary

220mm Wide Reflections Glass Panels

Glass Rake stair panels are pre-cut at 42° and are suitable for stairs pitched between 40° and 44°.

Landing Panels are designed for horizontal landing areas select either 80mm or 220mm width Glass Panels.

Glass Panels slot into the pre-grooved rails, we recommend that the glass is bedded onto a bead of silicon to stop any rattle or movement.

The Glass Reflections balustrade system has been designed to give a modern look to your staircase without the need of fussy connecting brackets or glass clamps. The Glass Reflections panels simply slot into the pre-grooved hand & base rails and spaced out between the infill strips supplied in the rail.

This Glass stair balustrade system can be used with existing newel posts, any style of new newel post or to complete the look fit the stylish Reflections Oak Newel Post from the range.

The solid Handrail & Base Rails are pre-grooved to accept any 8mm toughened glass panels both rails come with infill strips to fill between the panels.

Full Fitting Instruction can be downloaded from with the Fittings Tab above.

What Reflections Glass Balustrade Parts Do I Need?

To complete a straight flight of stairs with a landing return you will need to buy the following items from the Glass Reflections Range, assuming you are replacing your newel posts.

Reflections Glass Rake Panels - Subtract 100 from the length of the flight and divide by 400 to get the number of panels required (round up) - Example, 4000mm handrail length: 3900mm / 400 = 10 Glass Rake Panels.

Reflections Glass Oak Handrail and Base Rail Kits with Fillet Strip - Measure the distance between the newel posts to determine the length of Handrail or Base Rail required.

Reflections Newel Posts – For each post you will need the following 1 x Reflections Oak Newel Base 1 x Reflections Newel Base Connector 1 x Reflections Newel Post Cap.

This range does not include a half post, it is recommended that you finish you landing balustrade using and Oak Rosette / Patrice.

Reflections Glass Landing Panels - Subtract 100 from the landing length and divide by 320 to get the number of panels (round up) - Example, 2000mm handrail length: 1900mm / 320 = 6 Landing Glass Panels.

Optional items:

Reflections Intermediate Newel Post is designed to give additional strength to your balustrade, it is installed half way up your stair case and is connected to the underside of the handrail using the Intermediate Handrail bracket.

If you need to turn your handrail through 90 degrees on the landing, then you can use the 90 Degree handrail Connector or you can mitre and dowel the rail to create your own.

Free Stair Planning Service

If you are unsure what you need or require help planning your stair balustrade, please contact us and we will get a quote back to you info@blueprintjoinery.co.uk

Or Telephone us on 01691 67020

Please send us as much information as you can to aid us in getting the quote back to you quickly.

Specification

220mm Wide Reflections Glass Panels for Stairs 

• 8mm Toughened Glass
• Manufactured to BSEN12150
• Suitable stair balustrade 
• Rake Panels 220mm x 825mm - Overall size on the angle apporximatley 294mm Overall height 1087mm
• Landing Panel 220mm x 860mm
• Small Landing Panel 80mm x 860mm
• Small Rake Panel 80mm x 820mm.