Our Full Newel Posts are used on new staircases or when replacing the entire newel post. Can be used at the bottom and top of the stair case - Select type and timber from the drop-down box belowRead More
ITEM IN-STOCK Delivery Within 5 Working Days
£15.00 (To Ship Entire Order)
These Newel Posts match our Fluted Rolling Pin and Rope Twist designs giving you the option to mix and match to create a unique staircase of your own.
Available in Pine and Oak, however, if you require a different timber type please contact us for a quote.
The Pre-Drilled head allows you to select any type of newel post cap to finish the post. If you wish to have a Flat cap or Pyramid style cap fixed to your post please let us know and we will send your posts with a flat top head ready for the cap to be glued into position.
Newel Posts are fitted first followed by base rails and handrails.
Remember that handrail height needs to be 900mm.
This spigot dowel type newel has been designed to drop into a newel base with a 50mm diameter hole drilled in the top. This can be achieved by using new pre-drilled newel bases or by cutting your exiting posts down and drilling your own hole for the dowel.
Use a strong adhesive such as Joiners mate to glue the two components together and for an even stronger joint we recommend screwing through the newel base and into the spigot dowel of the newel post. Counter sink and screws so that they can be plugged or filled hiding them from view.
We recommend laying out your stair components to ensure handrail heights are 900mm before you cut any existing newel posts.
Handrail heights on the staircase are measured from the front bullnose of a step to the top of the handrail.
Spindles must not allow a sphere 100mm in diameter to pass between two spindles.
If you are unsure, please contact us or your building inspector for new builds.
You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here
There are no reviews for this product at the moment
Please log in to leave a review