90mm Chamfered Fluted Newel Post with Spigot Dowel

Summary

90mm Chamfered Fluted Spigot Newel Post 

Chamfered Corners with One Fluted on all 4 sides. 

These Fluted posts are designed to fit into either new newel bases or existing newel bases created by cutting down existing posts. Newel turnings come with a 50mm Spigot Dowel on the bottom.

Our traditional Benchmark double Fluted range of stair parts will give your staircase a modern contemporary look. The Chamfered and Fluted range of stair parts feature 41mm spindles and 90mm newel posts in a choice of 2 different timber types each style offering a distinctive look for your stairs.

Please note, we only list Pine and Oak currently on our website. Please contact us direct regarding Hemlock, White Primed, Ash and Sapele stair parts.

All newel posts are supplied ready for you to apply your chosen finish unless otherwise specified.

Choose from the following timbers:

• Scandinavian Pine – Softwood. A yellowish wood with knots and natural character. All knots are sound and live. Suitable for staining, varnishing or painting
• White Oak – Hardwood. Light brown clear timber with very small knot if any. Will turn golden brown when finishing in either oil, wax, stain or varnish.

Chamfered Fluted Newel Post Dimensions

Our ranch of Benchmark Newel Posts are available in the following sizes. Please select your required size.

• Full Post 90mm x 90mm x 820mm– For use on the landing and at the bottom and top of your staircase 
• Intermediate Post 90mm x 90mm x 850mm - For use as a mid newel when turning mid flight
• Half Post 90mm x 43mm x 820mm – Used up against a wall to finish the balustrade.

Newel posts do not come with newel caps. Choose the style of cap you like to finish the post off. All caps listed in this section will fit this post.

Free Stair Planning – Plan your Stairs

Not sure what you need for your stairs?

Then use our free planning software “Plan Your Stairs” to help you decide what you need, send in your details and we will supply you with a quote.

or

Send us a plan or photographs of yours stairs and we will be happy to work out the parts you need and supply you with a quote

Call Blueprint Joinery on 01691 671020 or email info@blueprintjoinery.co.uk

Newel Post Usage

If taking your entire newel post out is not an option then these newel turnings with spigot dowels are ideal. You can cut your existing newel down to create a newel base, drill a 50mm hole in the top and slot one of these posts into place. This is ideal for the DIY’er, saves time and money and gives your staircase a complete new look.

If your staircase turns then you may need an intermediate newel post. An intermediate newel post has Full Flutes on 3 Sides and Short Flutes on the forth which allows the handrail to go in at one height and come out at another. We have intermediate posts as an option but if you are unsure then contact us and we can provide the correct newel turning for your configuration. 

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here

Specification

Chamfered Fluted Newel Post with Spigot Dowel 

• Full Post 90mm x 90mm x 820mm– For use on the landing and at the bottom and top of your staircase
• Intermediate Post 90mm x 90mm x 850mm - For use as a mid newel when turning mid flight
• Half Post 90mm x 43mm x 820mm – Used up against a wall to finish the balustrade
• Spigots measure 50mm in diameter x 80mm Length.

Please note, we only list Pine and Oak currently on our website. Please contact us direct regarding Hemlock, White Primed, Ash and Sapele stair parts. 

You can download the Cheshire Mouldings Benchmark Fitting Instructions manual from here