32mm Low Profile Hand Rail 1800mm

Summary

LHR Low Profile Handrail 1800mm

Only Available in Pine 

LHR Low Profile Handrail Measures 41mm High x 62mm Wide 

Select your timber type and handrail length from the drop down boxes above 

This low profile handrail be used with any 32mm x 32mm spindle either on the staircase or across the landing.  

All LHR Hand Rails come complete with fillet strip/ Spindle Spacers used to fill the gap between each spindle. Spindle spacers are fixed in place with a suitable PVA wood adhesive, available in our shop, and can be pinned into place using panel pins. Panel pins should be sunk into the fillet strip of the rail and filled with a wood filler to match the timber. 

We recommend that spindles and fillet strips are glued into the handrail and base rail using PVA wood adhesive. This will give strength and stop any potential spindle rattle.

90 Degree horizontal handrail bends are available to turn your handrail from the newel post back across the landing. These can be created during installation by cutting a miter in the handrail and forming a 90 degree bend. 

Fixing Handrail to Newel Post

Handrails can be fitted to and design of newel post with a flat face by either a traditional Mortice and Tenon joint or by using our Low Profile handrail to newel post fixing kits. 

LHR Profile Rails can also be fitted to a wall as a wall mounted rail by using wall brackets designed to fit on the underside of the rail and then to a wall up the stair well or on a landing

Stair Case Building Regulations 

IMPORTANT - Spindles should not be spaced more than 99mm apart to meet current building regulations 

Current building Regulations state that a sphere of 100mm in diameter should not be allowed to pass between two spindles 

Handrails height needs to be a minimum of 900mm. Measure from the floor to the top of the handrail on the landing area and measure from the front of a tread to the top of the handrail on the stairs.

Specification

LHR Low Profile Handrail Dimensions 

LHR Hand Rail Measures

• 41mm High 
• 62mm Wide 
• Spindle Groove 32mm
• Spindle Spacers Supplied with Rails