Square Profile Grooved For Glass Handrail
58mm Wide x 58mm High pre-grooved for 8mm or 10mm Glass Stair Panels (click to open in a new tab).
Select from 1800mm, 2400mm, 3600mm or 4200mm Lengths.
These rails are manufactured from either Pine or American White Oak to match our ranges of Pine and Oak Stair Parts. The rails are pre-grooved to accept either 10mm or 8mm Glass Panels.
We recommend bedding your glass panels onto a silicone inside the rail groove, this will secure your glass and stop any potential rattle of glass against timber.
90° Bends are not available in this range, these can be created during installation by cutting a mitre in the handrail and forming a 90 degree bend.
Fixing Handrail to Newel Post
Handrails can be fitted to any design of newel post with a flat face by either a traditional Mortice and Tenon joint or by using our handrail to newel post fixing kits. Zip Fixings are not suitable for fixing these handrails.
Free Stair Planning Service
Not sure what you need for your stairs?
Send us a plan or photographs of your stairs and we will be happy to work out the parts you need and supply you with a quote. Call 01691 671020 or email email@example.com
Staircase Building Regulations
IMPORTANT - Spindles or Glass should not be spaced more than 99mm apart to meet current building regulations.
Current building Regulations state that a sphere of 100mm in diameter should not be allowed to pass between two spindles or glass panels.