HDR Profile Handrail
HDR Prifle Handrail Measures 56mm High x 59mm Wide
Select your timber type and handrail length from the drop down boxes above
This heavy duty handrail be used with any 41mm x 41mm spindle either on the staircase or across the landing. Oftn described as "LOAF" profile due to the shape.
All HDR Hand Rails come complete with fillet strip/ Spindle Spacers used to fill the gap between each spindle. Spindle spacers are fixed in place with a suitable PVA wood adhesive, available in our shop, and can be pinned into place using panel pins. Panel pins should be sunk into the fillet strip of the rail and filled with a wood filler to match the timber.
We recommend that spindles and fillet strips are glued into the handrail and base rail using PVA wood adhesive. This will give strength and stop any potential spindle rattle.
Fixing Handrail to Newel Post
Handrails can be fitted to and design of newel post with a flat face by either a traditional Mortice and Tenon joint or by using our handrail to newel post fixing kits.
HDR Rails can also be fitted to a wall as a wall mounted rail by using wall brackets designed to fit on the underside of the rail and then to a wall up the stair well or on a landing
Stair Case Building Regulations
IMPORTANT - Spindles should not be spaced more than 99mm apart to meet current building regulations
Current building Regulations state that a sphere of 100mm in diameter should not be allowed to pass between two spindles
HDR Handrail Dimensions
HDR Hand Rail Measures
Our Pine Stair parts are a Scandinavian Softwood, creamy white to yellow in colour. Naturally knotty timber with live sound knots.
Pine is ideal for painting, staining or varnishing.
If you are painting Pine rails remember to use a knotting solution to seal the knots before painting, tis will stop any sap seeping through the paint after installation. Primer, undercoat and top coats are required when finishing Pine.
There are no reviews for this product at the moment
Please log in to leave a review